KISS documentation
  • Welcome / Willkommen
  • English - KISS docu
    • KISS ESC 24A
      • Technical data
      • ESC wiring and connections
      • FW revisions
    • KISS ESC 25A
      • Technical data
      • ESC wiring and connections
      • FW revisions
    • KISS ESC 25A 4in1
      • Technical data
      • ESC wiring and connections
      • FW revisions
    • KISS ESC 32A
      • Technical data
      • ESC wiring and connections
      • FW revisions
    • KISS ESC common info
      • KISS ESC - serial receiver
      • KISS ESC - calibration & 3D mode
      • KISS ESC - FW update
      • KISS ESC - CLI
      • KISS ESC - FAQ
      • KISS ESC - safety warnings
      • KISS ESC - sinHybrid
      • KISS ESC - Dshot
    • KISS FC v1
    • KISS CC
    • KISS FC v2
    • KISS FC common info
  • Deutsch - KISS Doku
    • KISS ESC 24A
    • KISS ESC 25A
      • Technische Daten
      • ESC Anschlussbelegung
      • FW Revisionen
    • KISS ESC 25A 4-in-1
      • Technische Daten
      • ESC Anschlussbelegung
      • FW Revisionen
    • KISS ESC 32A
    • KISS ESC generelle Informationen
      • KISS ESC - serielle Empfänger
      • KISS ESC - Kalibrierung & 3D Modus
      • KISS ESC - FW update
      • KISS ESC - CLI
      • KISS ESC - häufige Fragen
      • KISS ESC - Sicherheitsinformationen
      • KISS ESC - sinHybrid
      • KISS ESC - Dshot
Powered by GitBook
On this page
  • Safety Warnings
  • Technical data
  • ESC wiring and connections
  • FW update
  • CLI - Command line interface
  • Frequently Asked Questions
  • Firmware revisions
  1. English - KISS docu

KISS ESC 25A 4in1

PreviousFW revisionsNextTechnical data

Last updated 6 years ago

Safety Warnings

  • Due to the regenerative braking, the KISS ESC should only be powered by LiPo batteries. A power supply might get damage when braking. The ESC takes care of itself.

  • Never start a brushless motor in your hands!

  • While starting up with propellers mounted, always do it in a distance of yourself & objects

  • The KISS ESC can be locally heated up to 80 ° C during operation!

  • While soldering do not connect a voltage source at the ESC / speed controller.

  • Some components on the KISS ESC can be destroyed by static charge. When handling such electronics, make sure to be grounded.

Technical data

ESC wiring and connections

FW update

CLI - Command line interface

Frequently Asked Questions

Firmware revisions

Technical data
ESC wiring and connections
KISS ESC - serial receiver
KISS ESC - FW update
KISS ESC - CLI
KISS ESC - FAQ
FW revisions